================================================================================
                                样例使用说明
                             Sample Description
================================================================================
功能描述：
此样例演示了ADC单次轮询(Polling)的方式采样AN0,AN1,AN4通道,并通过串口打印出来。

Function descriptions:
This sample demonstrates the ADC single-channel polling mode to sample channels 
AN0, AN1, and AN4. The sampled values are then printed via the serial port.
================================================================================
测试环境：
测试用板：PY32M030_STK
MDK版本： 5.28
IAR版本： 9.20
GCC版本： GNU Arm Embedded Toolchain 10.3-2021.10

Test environment:
Test board: PY32M030_STK
MDK Version: 5.28
IAR Version: 9.20
GCC Version: GNU Arm Embedded Toolchain 10.3-2021.10
================================================================================
使用步骤：
1. 编译下载程序到MCU，并运行；
2. 串口循环打印通道0，1，4的电压。

Example execution steps:
1.Compile and download the program to the MCU and run it.
2.The voltages of channels 0, 1, and 4 are printed in a loop via the serial port.
================================================================================
注意事项：
STK板        USB转TTL模块
PA02(TX) --> RX
PA03(RX) --> TX
GND      --> GND

波特率:115200

Notes:
STK board    USB to TTL module
PA02(TX) --> RX
PA03(RX) --> TX
GND      --> GND

Baud rate: 115200
================================================================================